SecureLogic Wall Safe Installation Instructions
Important- Read this
first before installing:
Safe must be in vertical
position in order for door to drop open
Door must be open in
order to install
The safe is designed to
install between 16" studs
Safe must be installed on
a vertical wall
Recommended installation
height is approximately 5 feet from the
floor
Once installed, allow
battery to charge for 24 hours
1. Locate desired mounting
location
2. The insertable section of the
safe is approximately 14" by 14." Once
mounting location is determined cut hole in wall
accordingly.
3. Carefully place safe in wall
4. Open safe door according to
instructions in owners manual
5. Locate the 4 mounting tabs, 2
on each side of the safe walls.
6. Screw bolts through mounting
tabs and into wall studs
|